2024 & 2025 Ford F-150 DIY Remote Start Installation

With Push-to-Start Ignitions

For 2024 & 2025 Ford F-150's with Key Ignitions: 

Get a head start on those frozen winter mornings by warming up the engine and fluids, defrosting your windshield, and getting the chill out of the interior all while drinking your coffee from the comfort of your home, or pre-cool it down on those hot days this summer after it's been sitting out in the sun for hours.

► Activated by your Ford Smart Key Remote Keyless Entry FOB

► 3 Connections to Vehicle Installation  ► No Programming Procedures   ► No Dealership Programming Involved

► Step-by-Step Illustrated Installation Guides   ► No Additional Parts Required

► Viper™ Long-Range Remotes Upgradable

► 2-Year Warranty  ► Unlimited Support  ► 45-Day Money-Back Performance Guarantee
 

Go Straight from Delivery to Installation

No Programming Procedures Required: Turn Ignition ON & OFF = DONE

2024 & 2025 Ford F-150 Remote Start Features:

• Activate the system by pressing your Ford's keyless entry remote's lock button 3 times: The distance at which you will be able to activate the remote starter will be the same distance that you can remotely lock and unlock your vehicle's doors now (unless you upgrade).
   
• 15-Minute Remote Start Run Time: The engine will shut down automatically after 15 minutes.
   
• Active Remote Shut-Down: You can cancel the remote starter sooner the same way you activated it.
   
• Active Key Takeover: Your keyless entry remotes will still remain working with the engine running by the remote starter, AND the remote starter will not shut down when the driver's door is opened, so you won't have to restart the vehicle normally every time after you remote start it.
   
• Automatically engages the vehicle's climate controls based on prior settings.
   
• Activates OEM autolights while running.
   
• Ford Dash Cluster Display Control: Set what options your vehicle has that the remote starter system can activate through your vehicle's settings display, like climate control, heated seats, heated steering wheel, less run time, and disable/enable remote start activation. Options depend on the vehicle's trim level. Equivalent to Ford OEM remote starter systems.
   

Do-It-Yourself Remote Starter Installation Has Never Been Easier:

• Just 1 T-Harness & 2 T-Tap Connections Installation: No wire cutting or splicing. One T-harness connection to the vehicle's OBD2 diagnostic connector and two T-tap connections behind the driver's side left kick panel is all thats required to install this system into a 2024 & 2025 Ford F-150s with Push-to-Start ignitions (see photos below.)
   
• No OBD2 Diagnostic Plug Blocking: This system utilizes a Y-connector, keeping your vehicle's OBD2 port accessible for any diagnostic service. No need to unplug the remote starter system every time you need to use the vehicle's OBD2 port. You just remove the vehicle's OBD2 plug and plug it into the T-harness, then snap in the plug from the Y-harness into the bracket where you removed the vehicle's OBD2 connector.
   
• System activation is done simply by turning the vehicle's ignition ON, watch for the green LED to turn OFF, and then turn the ignition OFF. DONE!
   
• No key programming procedures, no additional parts, no computers, or special dealer programmers involved.
   
• Step-by-Step Illustrated Installation Instructions with YouTube Demo Videos.
   

OBD2 T-Harness Connection. Bottom Lower Left of Driver's Dash.

2 T-Tap Connections Behind Driver's Side Lower Left Kick Panel.